feat: add debian12

autoinstall/preseed.cfg

@@ -0,0 +1,475 @@
+#_preseed_V1
+#### Contents of the preconfiguration file (for booksworm)
+# Preseeding only locale sets language, country and locale.
+#d-i debian-installer/locale string en_US.UTF-8
+
+# The values can also be preseeded individually for greater flexibility.
+d-i debian-installer/language string en
+d-i debian-installer/country string FR
+d-i debian-installer/locale string en_US.UTF-8
+# Optionally specify additional locales to be generated.
+d-i localechooser/supported-locales multiselect en_US.UTF-8, fr_FR.UTF-8
+#d-i debian-installer/fallbacklocale select fr_FR.UTF-8
+#d-i debian-installer/locale select en_US.UTF-8
+
+# Keyboard selection.
+d-i keyboard-configuration/xkb-keymap select fr
+d-i console-keymaps-at/keymap select fr-latin9
+d-i debian-installer/keymap string fr-latin9
+
+### Network configuration
+# Disable network configuration entirely. This is useful for cdrom
+# installations on non-networked devices where the network questions,
+# warning and long timeouts are a nuisance.
+#d-i netcfg/enable boolean false
+
+# netcfg will choose an interface that has link if possible. This makes it
+# skip displaying a list if there is more than one interface.
+d-i netcfg/choose_interface select auto
+
+# To set a different link detection timeout (default is 3 seconds).
+# Values are interpreted as seconds.
+d-i netcfg/link_wait_timeout string 5
+
+# If you have a slow dhcp server and the installer times out waiting for
+# it, this might be useful.
+d-i netcfg/dhcp_timeout string 60
+#d-i netcfg/dhcpv6_timeout string 60
+
+# Automatic network configuration is the default.
+# If you prefer to configure the network manually, uncomment this line and
+# the static network configuration below.
+#d-i netcfg/disable_autoconfig boolean true
+
+# If you want the preconfiguration file to work on systems both with and
+# without a dhcp server, uncomment these lines and the static network
+# configuration below.
+#d-i netcfg/dhcp_failed note
+#d-i netcfg/dhcp_options select Configure network manually
+
+# Static network configuration.
+#
+# IPv4 example
+#d-i netcfg/get_ipaddress string 192.168.1.42
+#d-i netcfg/get_netmask string 255.255.255.0
+#d-i netcfg/get_gateway string 192.168.1.1
+#d-i netcfg/get_nameservers string 192.168.1.1
+#d-i netcfg/confirm_static boolean true
+#
+# IPv6 example
+#d-i netcfg/get_ipaddress string fc00::2
+#d-i netcfg/get_netmask string ffff:ffff:ffff:ffff::
+#d-i netcfg/get_gateway string fc00::1
+#d-i netcfg/get_nameservers string fc00::1
+#d-i netcfg/confirm_static boolean true
+
+# Any hostname and domain names assigned from dhcp take precedence over
+# values set here. However, setting the values still prevents the questions
+# from being shown, even if values come from dhcp.
+d-i netcfg/get_hostname string unassigned-hostname
+d-i netcfg/get_domain string unassigned-domain
+
+# If you want to force a hostname, regardless of what either the DHCP
+# server returns or what the reverse DNS entry for the IP is, uncomment
+# and adjust the following line.
+#d-i netcfg/hostname string somehost
+
+# Disable that annoying WEP key dialog.
+d-i netcfg/wireless_wep string
+# The wacky dhcp hostname that some ISPs use as a password of sorts.
+#d-i netcfg/dhcp_hostname string radish
+
+# If you want to completely disable firmware lookup (i.e. not use firmware
+# files or packages that might be available on installation images):
+#d-i hw-detect/firmware-lookup string never
+
+# If non-free firmware is needed for the network or other hardware, you can
+# configure the installer to always try to load it, without prompting. Or
+# change to false to disable asking.
+d-i hw-detect/load_firmware boolean false
+
+### Network console
+# Use the following settings if you wish to make use of the network-console
+# component for remote installation over SSH. This only makes sense if you
+# intend to perform the remainder of the installation manually.
+#d-i anna/choose_modules string network-console
+#d-i network-console/authorized_keys_url string http://10.0.0.1/openssh-key
+#d-i network-console/password password r00tme
+#d-i network-console/password-again password r00tme
+
+### Mirror settings
+# Mirror protocol:
+# If you select ftp, the mirror/country string does not need to be set.
+# Default value for the mirror protocol: http.
+#d-i mirror/protocol string ftp
+d-i mirror/country string FR
+d-i mirror/http/hostname string deb.debian.org
+d-i mirror/http/directory string /debian
+d-i mirror/http/proxy string
+
+# Suite to install.
+#d-i mirror/suite string testing
+# Suite to use for loading installer components (optional).
+#d-i mirror/udeb/suite string testing
+
+### Account setup
+# Skip creation of a root account (normal user account will be able to
+# use sudo).
+d-i passwd/root-login boolean true
+# Alternatively, to skip creation of a normal user account.
+d-i passwd/make-user boolean false
+
+# Root password, either in clear text
+d-i passwd/root-password password packer
+d-i passwd/root-password-again password packer
+# or encrypted using a crypt(3)  hash.
+#d-i passwd/root-password-crypted password [$6$vnNlrAnstgaHYy3U$G2cn0/JQ.U1ssiugJNT4HAbFoOdlduSigYF7wP8DdpJin6W9ddbbjJXPSAU98.8jLn18wSfDNkBqesxdz6pm50]
+
+# To create a normal user account.
+#d-i passwd/user-fullname string packer
+#d-i passwd/username string packer
+# Normal user's password, either in clear text
+#d-i passwd/user-password password packer
+#d-i passwd/user-password-again password packer
+# or encrypted using a crypt(3) hash.
+#d-i passwd/user-password-crypted password [$6$vnNlrAnstgaHYy3U$G2cn0/JQ.U1ssiugJNT4HAbFoOdlduSigYF7wP8DdpJin6W9ddbbjJXPSAU98.8jLn18wSfDNkBqesxdz6pm50]
+# Create the first user with the specified UID instead of the default.
+#d-i passwd/user-uid string 1010
+
+# The user account will be added to some standard initial groups. To
+# override that, use this.
+#d-i passwd/user-default-groups string audio cdrom video
+
+### Clock and time zone setup
+# Controls whether or not the hardware clock is set to UTC.
+d-i clock-setup/utc boolean true
+
+# You may set this to any valid setting for $TZ; see the contents of
+# /usr/share/zoneinfo/ for valid values.
+d-i time/zone string Europe/Paris
+
+# Controls whether to use NTP to set the clock during the install
+d-i clock-setup/ntp boolean true
+# NTP server to use. The default is almost always fine here.
+d-i clock-setup/ntp-server string 0.fr.pool.ntp.org
+
+### Partitioning
+## Partitioning example
+# If the system has free space you can choose to only partition that space.
+# This is only honoured if partman-auto/method (below) is not set.
+#d-i partman-auto/init_automatically_partition select biggest_free
+
+# Alternatively, you may specify a disk to partition. If the system has only
+# one disk the installer will default to using that, but otherwise the device
+# name must be given in traditional, non-devfs format (so e.g. /dev/sda
+# and not e.g. /dev/discs/disc0/disc).
+# For example, to use the first SCSI/SATA hard disk:
+d-i partman-auto/disk string /dev/sda
+# In addition, you'll need to specify the method to use.
+# The presently available methods are:
+# - regular: use the usual partition types for your architecture
+# - lvm:     use LVM to partition the disk
+# - crypto:  use LVM within an encrypted partition
+d-i partman-auto/method string lvm
+
+# You can define the amount of space that will be used for the LVM volume
+# group. It can either be a size with its unit (eg. 20 GB), a percentage of
+# free space or the 'max' keyword.
+d-i partman-auto-lvm/guided_size string max
+
+# If one of the disks that are going to be automatically partitioned
+# contains an old LVM configuration, the user will normally receive a
+# warning. This can be preseeded away...
+d-i partman-lvm/device_remove_lvm boolean true
+# The same applies to pre-existing software RAID array:
+#d-i partman-md/device_remove_md boolean true
+# And the same goes for the confirmation to write the lvm partitions.
+d-i partman-lvm/confirm boolean true
+d-i partman-lvm/confirm_nooverwrite boolean true
+
+# You can choose one of the three predefined partitioning recipes:
+# - atomic: all files in one partition
+# - home:   separate /home partition
+# - multi:  separate /home, /var, and /tmp partitions
+d-i partman-auto/choose_recipe select atomic
+
+# Or provide a recipe of your own...
+# If you have a way to get a recipe file into the d-i environment, you can
+# just point at it.
+#d-i partman-auto/expert_recipe_file string /hd-media/recipe
+
+# If not, you can put an entire recipe into the preconfiguration file in one
+# (logical) line. This example creates a small /boot partition, suitable
+# swap, and uses the rest of the space for the root partition:
+#d-i partman-auto/expert_recipe string                         \
+#      boot-root ::                                            \
+#              40 50 100 ext3                                  \
+#                      $primary{ } $bootable{ }                \
+#                      method{ format } format{ }              \
+#                      use_filesystem{ } filesystem{ ext3 }    \
+#                      mountpoint{ /boot }                     \
+#              .                                               \
+#              500 10000 1000000000 ext3                       \
+#                      method{ format } format{ }              \
+#                      use_filesystem{ } filesystem{ ext3 }    \
+#                      mountpoint{ / }                         \
+#              .                                               \
+#              64 512 300% linux-swap                          \
+#                      method{ swap } format{ }                \
+#              .
+
+# The full recipe format is documented in the file partman-auto-recipe.txt
+# included in the 'debian-installer' package or available from D-I source
+# repository. This also documents how to specify settings such as file
+# system labels, volume group names and which physical devices to include
+# in a volume group.
+
+## Partitioning for EFI
+# If your system needs an EFI partition you could add something like
+# this to the recipe above, as the first element in the recipe:
+#               538 538 1075 free                              \
+#                      $iflabel{ gpt }                         \
+#                      $reusemethod{ }                         \
+#                      method{ efi }                           \
+#                      format{ }                               \
+#               .                                              \
+#
+# The fragment above is for the amd64 architecture; the details may be
+# different on other architectures. The 'partman-auto' package in the
+# D-I source repository may have an example you can follow.
+
+# This makes partman automatically partition without confirmation, provided
+# that you told it what to do using one of the methods above.
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+# Force UEFI booting ('BIOS compatibility' will be lost). Default: false.
+#d-i partman-efi/non_efi_system boolean true
+# Ensure the partition table is GPT - this is required for EFI
+#d-i partman-partitioning/choose_label select gpt
+#d-i partman-partitioning/default_label string gpt
+
+# When disk encryption is enabled, skip wiping the partitions beforehand.
+#d-i partman-auto-crypto/erase_disks boolean false
+
+## Partitioning using RAID
+# The method should be set to "raid".
+#d-i partman-auto/method string raid
+# Specify the disks to be partitioned. They will all get the same layout,
+# so this will only work if the disks are the same size.
+#d-i partman-auto/disk string /dev/sda /dev/sdb
+
+# Next you need to specify the physical partitions that will be used.
+#d-i partman-auto/expert_recipe string \
+#      multiraid ::                                         \
+#              1000 5000 4000 raid                          \
+#                      $primary{ } method{ raid }           \
+#              .                                            \
+#              64 512 300% raid                             \
+#                      method{ raid }                       \
+#              .                                            \
+#              500 10000 1000000000 raid                    \
+#                      method{ raid }                       \
+#              .
+
+# Last you need to specify how the previously defined partitions will be
+# used in the RAID setup. Remember to use the correct partition numbers
+# for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;
+# devices are separated using "#".
+# Parameters are:
+# <raidtype> <devcount> <sparecount> <fstype> <mountpoint> \
+#          <devices> <sparedevices>
+
+#d-i partman-auto-raid/recipe string \
+#    1 2 0 ext3 /                    \
+#          /dev/sda1#/dev/sdb1       \
+#    .                               \
+#    1 2 0 swap -                    \
+#          /dev/sda5#/dev/sdb5       \
+#    .                               \
+#    0 2 0 ext3 /home                \
+#          /dev/sda6#/dev/sdb6       \
+#    .
+
+# For additional information see the file partman-auto-raid-recipe.txt
+# included in the 'debian-installer' package or available from D-I source
+# repository.
+
+# This makes partman automatically partition without confirmation.
+d-i partman-md/confirm boolean true
+d-i partman-partitioning/confirm_write_new_label boolean true
+d-i partman/choose_partition select finish
+d-i partman/confirm boolean true
+d-i partman/confirm_nooverwrite boolean true
+
+## Controlling how partitions are mounted
+# The default is to mount by UUID, but you can also choose "traditional" to
+# use traditional device names, or "label" to try filesystem labels before
+# falling back to UUIDs.
+d-i partman/mount_style select uuid
+
+### Base system installation
+# Configure APT to not install recommended packages by default. Use of this
+# option can result in an incomplete system and should only be used by very
+# experienced users.
+d-i base-installer/install-recommends boolean false
+
+# The kernel image (meta) package to be installed; "none" can be used if no
+# kernel is to be installed.
+#d-i base-installer/kernel/image string linux-image-686
+
+### Apt setup
+# Choose, if you want to scan additional installation media
+# (default: false).
+d-i apt-setup/cdrom/set-first boolean false
+# You can choose to install non-free firmware.
+#d-i apt-setup/non-free-firmware boolean true
+# You can choose to install non-free and contrib software.
+#d-i apt-setup/non-free boolean true
+#d-i apt-setup/contrib boolean true
+# Uncomment the following line, if you don't want to have the sources.list
+# entry for a DVD/BD installation image active in the installed system
+# (entries for netinst or CD images will be disabled anyway, regardless of
+# this setting).
+#d-i apt-setup/disable-cdrom-entries boolean true
+# Uncomment this if you don't want to use a network mirror.
+d-i apt-setup/use_mirror boolean true
+# Select which update services to use; define the mirrors to be used.
+# Values shown below are the normal defaults.
+#d-i apt-setup/services-select multiselect security, updates
+d-i apt-setup/security_host string security.debian.org
+
+# Additional repositories, local[0-9] available
+#d-i apt-setup/local0/repository string \
+#       http://local.server/debian stable main
+#d-i apt-setup/local0/comment string local server
+# Enable deb-src lines
+#d-i apt-setup/local0/source boolean true
+# URL to the public key of the local repository; you must provide a key or
+# apt will complain about the unauthenticated repository and so the
+# sources.list line will be left commented out.
+#d-i apt-setup/local0/key string http://local.server/key
+# or one can provide it in-line by base64 encoding the contents of the
+# key file (with `base64 -w0`) and specifying it thus:
+#d-i apt-setup/local0/key string base64://LS0tLS1CRUdJTiBQR1AgUFVCTElDIEtFWSBCTE9DSy0tLS0tCi4uLgo=
+# The content of the key file is checked to see if it appears to be ASCII-armoured.
+# If so it will be saved with an ".asc" extension, otherwise it gets a '.gpg' extension.
+# "keybox database" format is currently not supported. (see generators/60local in apt-setup's source)
+
+# By default the installer requires that repositories be authenticated
+# using a known gpg key. This setting can be used to disable that
+# authentication. Warning: Insecure, not recommended.
+#d-i debian-installer/allow_unauthenticated boolean true
+
+# Uncomment this to add multiarch configuration for i386
+#d-i apt-setup/multiarch string i386
+
+### Package selection
+tasksel tasksel/first multiselect standard, ssh-server
+
+# Or choose to not get the tasksel dialog displayed at all (and don't install
+# any packages):
+#d-i pkgsel/run_tasksel boolean false
+
+# Individual additional packages to install
+d-i pkgsel/include string ca-certificates cloud-init qemu-guest-agent sudo
+# Whether to upgrade packages after debootstrap.
+# Allowed values: none, safe-upgrade, full-upgrade
+d-i pkgsel/upgrade select safe-upgrade
+
+# You can choose, if your system will report back on what software you have
+# installed, and what software you use. The default is not to report back,
+# but sending reports helps the project determine what software is most
+# popular and should be included on the first CD/DVD.
+popularity-contest popularity-contest/participate boolean false
+
+### Boot loader installation
+# Grub is the boot loader (for x86).
+
+# This is fairly safe to set, it makes grub install automatically to the UEFI
+# partition/boot record if no other operating system is detected on the machine.
+d-i grub-installer/only_debian boolean true
+
+# This one makes grub-installer install to the UEFI partition/boot record, if
+# it also finds some other OS, which is less safe as it might not be able to
+# boot that other OS.
+d-i grub-installer/with_other_os boolean false
+
+# Due notably to potential USB sticks, the location of the primary drive can
+# not be determined safely in general, so this needs to be specified:
+#d-i grub-installer/bootdev  string /dev/sda
+# To install to the primary device (assuming it is not a USB stick):
+d-i grub-installer/bootdev string default
+
+# Alternatively, if you want to install to a location other than the UEFI
+# parition/boot record, uncomment and edit these lines:
+#d-i grub-installer/only_debian boolean false
+#d-i grub-installer/with_other_os boolean false
+#d-i grub-installer/bootdev  string (hd0,1)
+# To install grub to multiple disks:
+#d-i grub-installer/bootdev  string (hd0,1) (hd1,1) (hd2,1)
+
+# Optional password for grub, either in clear text
+#d-i grub-installer/password password r00tme
+#d-i grub-installer/password-again password r00tme
+# or encrypted using an MD5 hash, see grub-md5-crypt(8).
+#d-i grub-installer/password-crypted password [MD5 hash]
+
+# Use the following option to add additional boot parameters for the
+# installed system (if supported by the bootloader installer).
+# Note: options passed to the installer will be added automatically.
+#d-i debian-installer/add-kernel-opts string nousb
+
+### Finishing up the installation
+# During installations from serial console, the regular virtual consoles
+# (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
+# line to prevent this.
+#d-i finish-install/keep-consoles boolean true
+
+# Avoid that last message about the install being complete.
+d-i finish-install/reboot_in_progress note
+
+# This will prevent the installer from ejecting the CD during the reboot,
+# which is useful in some situations.
+d-i cdrom-detect/eject boolean true
+
+# This is how to make the installer shutdown when finished, but not
+# reboot into the installed system.
+#d-i debian-installer/exit/halt boolean true
+# This will power off the machine instead of just halting it.
+#d-i debian-installer/exit/poweroff boolean true
+
+### Preseeding other packages
+# Depending on what software you choose to install, or if things go wrong
+# during the installation process, it's possible that other questions may
+# be asked. You can preseed those too, of course. To get a list of every
+# possible question that could be asked during an install, do an
+# installation, and then run these commands:
+#   debconf-get-selections --installer > file
+#   debconf-get-selections >> file
+
+#### Advanced options
+### Running custom commands during the installation
+# d-i preseeding is inherently not secure. Nothing in the installer checks
+# for attempts at buffer overflows or other exploits of the values of a
+# preconfiguration file like this one. Only use preconfiguration files from
+# trusted locations! To drive that home, and because it's generally useful,
+# here's a way to run any shell command you'd like inside the installer,
+# automatically.
+
+# This first command is run as early as possible, just after
+# preseeding is read.
+#d-i preseed/early_command string anna-install some-udeb
+# This command is run immediately before the partitioner starts. It may be
+# useful to apply dynamic partitioner preseeding that depends on the state
+# of the disks (which may not be visible when preseed/early_command runs).
+#d-i partman/early_command \
+#       string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
+# This command is run just before the install finishes, but when there is
+# still a usable /target directory. You can chroot to /target and use it
+# directly, or use the apt-install and in-target commands to easily install
+# packages and run commands in the target system.
+#d-i preseed/late_command string
+d-i preseed/late_command string in-target sed -e 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/' -i /etc/ssh/sshd_config

autoinstall/user-data

@@ -0,0 +1,76 @@
+#cloud-config
+autoinstall:
+  version: 1
+  refresh-installer:
+    update: false
+  apt:
+    preserve_sources_list: false
+    primary:
+    - arches: [amd64]
+      uri: http://archive.ubuntu.com/ubuntu
+  storage:
+    version: 1
+    config:
+    - { id: vdisk, ptable: msdos, path: /dev/sda, wipe: superblock, grub_device: true, type: disk }
+
+    # # Linux EFI boot partition (256MB)
+    # - { device: vdisk, size: 268435456, flag: 'boot', number: 1, grub_device: true, type: partition, id: efi-partition }
+    # - { fstype: fat32, volume: efi-partition, type: format, id: efi-format, label: ESP }
+    # - { path: /boot/efi, device: efi-format, type: mount, id: mount-efi }
+
+    # Linux boot partition (512MB)
+    - { device: vdisk, size: 536870912, number: 1, flag: boot, type: partition, id: boot-partition }
+    - { fstype: ext4, volume: boot-partition, type: format, id: boot-format }
+    - { path: /boot, device: boot-format, type: mount, id: mount-boot, options: "rw,nodev,nosuid,noexec" }
+
+    # Partition for LVM
+    - { device: vdisk, size: -1, number: 2,type: partition, id: lvm-partition }
+    - { name: monverre, devices: [ lvm-partition ], preserve: false, type: lvm_volgroup, id: lvm_volgroup-0 }
+
+    # LV for root (12GB)
+    - { name: sys, volgroup: lvm_volgroup-0, size: 12884901888, wipe: superblock, preserve: false, type: lvm_partition, id: lvm_partition-sys }
+    - { fstype: ext4, volume: lvm_partition-sys, type: format, id: format-lvm-sys }
+    - { path: /, device: format-lvm-sys, type: mount, id: mount-lvm-sys }
+
+    # LV for home (4GB)
+    - { name: home, volgroup: lvm_volgroup-0, size: 4294967296, wipe: superblock, preserve: false, type: lvm_partition, id: lvm_partition-home }
+    - { fstype: ext4, volume: lvm_partition-home, type: format, id: format-lvm-home }
+    - { path: /home, device: format-lvm-home, type: mount, id: mount-lvm-home, options: "rw,nodev,nosuid,noexec" }
+
+    # LV for tmp (2GB)
+    - { name: tmp, volgroup: lvm_volgroup-0, size: 2147483648, wipe: superblock, preserve: false, type: lvm_partition, id: lvm_partition-tmp }
+    - { fstype: ext4, volume: lvm_partition-tmp, type: format, id: format-lvm-tmp }
+    - { path: /tmp, device: format-lvm-tmp, type: mount, id: mount-lvm-tmp, options: "rw,nodev,nosuid" }
+    swap:
+      size: 0
+  ssh:
+    allow_public_ssh_keys: true
+    allow-pw: true
+    disable-root: false
+    install-server: true
+    ssh_quiet_keygen: true
+  locale: en_US
+  keyboard:
+    layout: fr
+  network:
+    network:
+      version: 2
+      ethernets:
+        enp6s18:
+          dhcp4: true
+  packages:
+    - linux-image-virtual-hwe-22.04
+    - qemu-guest-agent
+    - sudo
+    - wireguard
+  user-data:
+    package_upgrade: false
+    timezone: Europe/Paris
+    users:
+      - name: packer
+        groups: [adm, sudo]
+        lock-passwd: false
+        sudo: ALL=(ALL) NOPASSWD:ALL
+        shell: /bin/bash
+        # password crypted with sha512. default value = "packer"
+        passwd: $6$lhHsNpj6wyEXs7sn$cOf53uNhEBuNOGeYBMZkCrRS.WzsnwkhY0caiAbbXw4AwumP.7W7e8n0r71vbDey7AMYNsLI5ZEaeqKr.DtYM/

debian12.pkr.hcl

@@ -0,0 +1,228 @@
+packer {
+  required_plugins {
+    name = {
+      version = "~> 1"
+      source  = "github.com/hashicorp/proxmox"
+    }
+  }
+}
+
+variable "bios_type" {
+  type = string
+}
+
+variable "boot_command" {
+  type = string
+}
+
+variable "boot_wait" {
+  type = string
+}
+
+variable "bridge_firewall" {
+  type    = bool
+  default = false
+}
+
+variable "bridge_name" {
+  type = string
+}
+
+variable "cloud_init" {
+  type = bool
+}
+
+variable "iso_file" {
+  type = string
+}
+
+variable "iso_storage_pool" {
+  type    = string
+  default = "local"
+}
+
+variable "machine_default_type" {
+  type    = string
+  default = "pc"
+}
+
+variable "network_model" {
+  type    = string
+  default = "virtio"
+}
+
+variable "os_type" {
+  type    = string
+  default = "l26"
+}
+
+variable "proxmox_api_token_id" {
+  type = string
+}
+
+variable "proxmox_api_token_secret" {
+  type      = string
+  sensitive = true
+}
+
+variable "proxmox_api_url" {
+  type = string
+}
+
+variable "proxmox_node" {
+  type = string
+}
+
+variable "qemu_agent_activation" {
+  type    = bool
+  default = true
+}
+
+variable "scsi_controller_type" {
+  type = string
+}
+
+variable "ssh_timeout" {
+  type = string
+}
+
+variable "tags" {
+  type = string
+}
+
+variable "io_thread" {
+  type = bool
+}
+
+variable "cpu_type" {
+  type    = string
+  default = "x86-64-v3"
+}
+
+variable "vm_info" {
+  type = string
+}
+
+variable "disk_discard" {
+  type    = bool
+  default = true
+}
+
+variable "disk_format" {
+  type    = string
+  default = "qcow2"
+}
+
+variable "disk_size" {
+  type    = string
+  default = "16G"
+}
+
+variable "disk_type" {
+  type    = string
+  default = "scsi"
+}
+
+variable "nb_core" {
+  type    = number
+  default = 1
+}
+
+variable "nb_cpu" {
+  type    = number
+  default = 1
+}
+
+variable "nb_ram" {
+  type    = number
+  default = 1024
+}
+
+variable "ssh_username" {
+  type = string
+}
+
+variable "ssh_password" {
+  type = string
+}
+
+variable "ssh_handshake_attempts" {
+  type = number
+}
+
+variable "storage_pool" {
+  type    = string
+  default = "local-zfs"
+}
+
+variable "vm_id" {
+  type    = number
+  default = 99999
+}
+
+variable "vm_name" {
+  type = string
+}
+
+locals {
+  packer_timestamp = formatdate("YYYYMMDD-hhmm", timestamp())
+}
+
+source "proxmox-iso" "debian12" {
+  bios                     = "${var.bios_type}"
+  boot_command             = ["${var.boot_command}"]
+  boot_wait                = "${var.boot_wait}"
+  cloud_init               = "${var.cloud_init}"
+  cloud_init_storage_pool  = "${var.storage_pool}"
+  communicator             = "ssh"
+  cores                    = "${var.nb_core}"
+  cpu_type                 = "${var.cpu_type}"
+  http_directory           = "autoinstall"
+  insecure_skip_tls_verify = true
+  iso_file                 = "${var.iso_file}"
+  machine                  = "${var.machine_default_type}"
+  memory                   = "${var.nb_ram}"
+  node                     = "${var.proxmox_node}"
+  os                       = "${var.os_type}"
+  proxmox_url              = "${var.proxmox_api_url}"
+  qemu_agent               = "${var.qemu_agent_activation}"
+  scsi_controller          = "${var.scsi_controller_type}"
+  sockets                  = "${var.nb_cpu}"
+  ssh_handshake_attempts   = "${var.ssh_handshake_attempts}"
+  ssh_pty                  = true
+  ssh_timeout              = "${var.ssh_timeout}"
+  ssh_username             = "${var.ssh_username}"
+  ssh_password             = "${var.ssh_password}"
+  tags                     = "${var.tags}"
+  template_description     = "${var.vm_info} - ${local.packer_timestamp}"
+  token                    = "${var.proxmox_api_token_secret}"
+  unmount_iso              = true
+  username                 = "${var.proxmox_api_token_id}"
+  vm_id                    = "${var.vm_id}"
+  vm_name                  = "${var.vm_name}"
+
+  efi_config {
+    efi_storage_pool  = "${var.storage_pool}"
+    pre_enrolled_keys = false
+    efi_type          = "4m"
+  }
+
+  disks {
+    discard      = "${var.disk_discard}"
+    disk_size    = "${var.disk_size}"
+    format       = "${var.disk_format}"
+    io_thread    = "${var.io_thread}"
+    storage_pool = "${var.storage_pool}"
+    type         = "${var.disk_type}"
+  }
+
+  network_adapters {
+    bridge   = "${var.bridge_name}"
+    firewall = "${var.bridge_firewall}"
+    model    = "${var.network_model}"
+  }
+}
+
+build {
+  sources = ["source.proxmox-iso.debian12"]
+}